Just some simple tips for self-maintaining of the raymond grinding machine, details as follows:
1. Excluding the floating bearing in the principal axis, all other transmission parts adopt the rolling bearings, so the machine should be running under the good lubricating conditions.
2. The metal blocks are strictly prohibited into the machine. Immediately take them out when users find if, otherwise that will seriously damage the roller, ring, shovel, and Quincunx Rack.
3. Then the material will be fed evenly and continuously into the machine.
4. When their application time surpassing about 500 hours, all the rolling bearings in the roller sleeves of raymond mill must be cleaned, and the damaged parts should be replaced. The oiling tool can be either a manual oiling pump or grease gun..
