天天5g天天爽人妻熟女,熟妇多毛,无码aaaaa,国产熟女高潮

Diametre=2.0m? Length=3.5m

Tyre chain-net rubber boat fender

?

?

?

???????????????????????????????????????

Structure of penumatic rubber fender for ship

???? Out adhesive:Protective cord layer and inner adhesive have high tensile strength and abrasion?resistance.

??? Cord layer:Strong layer of the penumatic rubber fender is made from winding high strength polyamide fibre cord fabric.

??? Inner adhesive:The cord layer of pneumatic rubber fender assures no gas leakage from the compressor.

??? End-flange:The end-flange is a part to fix air valve componet,buried metal part and the cord layer and used for hoisting,and filling and discharging gas.The structure of end-flange is shown in Fig.

?

Note about applying Penumatic rubber fender:

1. Frequently check wether the airbag spheroid is damaged and whether the pressure is normal,and the valve core must be replaced every six months.
2. The steel wire should wrap the rubber pipe,when trying steel wire to pneumatic rubber fender in case the fender is stabbed.
3. The suface and subject next to the penumatic rubber fender cant be hard and sharp point in case the fender is stabbed.
4. The accessories and jips nut cant be loose when testing the internal pressure.
5. When applying the penumatic rubber fender,the rope net should be reliable,the steel wire used for hanging metal parts and the hook link cant be tied in disorder.

?

Storage of Penumatic rubber fender

1. When not using for a long time,wash the fender suface,dry up and fill in sufficient right amount of compressed air to lay in a cool,dry and well-ventilated place.
2. The storage place of penumatic rubber fender should be far away from heat source.
3. Try to keep fender away from acid,alkali,grease and organic solvents.
4. When not applying the fender,the penumatic rubber fender cant be piled up and heavy items cant be piled on the fender